Ralink MTK RT3050 RT305X RT3052 datasheet pdf download
The RT3050 SOC combines Ralink’s 802.11n draft
compliant 2T2R MAC/BBP/RF, a high performance
384MHz MIPS24KEc CPU core, 5-port integrated
10/100 Ethernet switch/PHY, an USB OTG and a
Gigabit Ethernet MAC. With the RT3050, there are
very few external components required for 2.4GHz
11n wireless products. The RT3052 employs Ralink
2nd generation 11n technologies for longer range and
better throughput. The embedded high performance
CPU can process advanced applications effortlessly,
such as routing, security and VOIP. The USB por t can
be configured to access external storage for Digital
Home applications. In addition, the RT3050 has rich
hardware interfaces (SPI/I2S/I2C/UART/GMAC) to
enable many possible applications.
Features
Embedded 1T1R 2.4G CMOS RF
Embedded 802.11n 1T1R MAC/BBP w/MLD
enhancement
300Mbps PHY data rate
1x1 modes
20Mhz/40Mhz channel width
Legacy and high throughout modes
Reverse Data Grant (RDG) support
Compressed Block ACK
Up to 256 clients
Multiple BSSID (up to 8)
WEP64/128, WPA, WPA2 engines
QOS - WMM, WMM Power Save
Hardware frame aggregation
International Regulation - 802.11h TPC
MIPS 24KEc 384Mhz with 32KB I cache/16KB D
cache
Support 16/32-bit SDR SDRAM (up-to 64M bytes)
SDRAM data [31:16] sre pins shared with GPIO
Support boot from 8/16-bit parallel NOR type Flash
(up-to 16M bytes))
Support boot from NAND type Flash (up-to 64 M bytes)
Support boot from ROM iNIC mode
USB2.0 OTG x 1
Embedded a 7-port Ethernet switch and a 5 port
10/100Mbps PHY
Support 5 10/100 UTP ports and one RGMII/MII port for
RT3052 only
Hardware NAT, QoS, TCP/UDP/IP Checksum offloading
Slow speed I/O : GPIO, I2C, SPI, UART, MDC/MDIO,
JTAG,PCM and I2S
Package and I/O voltage
14mm x 14mm TFBGA-289 Package
I/O : 3.3V/2.5V(RGMII), 3.3v I/O
Click here to download Ralink MTK RT3052 RT305X RT3050 datasheet pdf
Ralink MTK Datasheet Specification RT3050 RT3052 RT305X pdf download
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment